End suction fire pump comply with NFPA20 and FM-by guomei pump

XBD-XA50/32H, XBD-XA80/32 etc end suction fire pump produced by Spark fire , which part of Guomei pump is ready, any interest, contact us

vertical multistage pump, vertical booster pump, Grundfos CR vertical multistage pump

CDLF Vertical Multistage centrifugal Pumps adopt stainless steel AISI304 or 316, special in high 
pressure. Impeller,guide vane and all parts contact with liquid are of stainless steel punched and 
welded, so the flow road is very smooth and prevent producing second pollution. Shaft and sleeve 

are of hard alloy and adopt wear resistant mechanical seal, having super service time and no-leakage.

Product name : CDLF vertical multistage pump( equivalent to Grundfos)

Type : CDLf2 , CDLF4, CDLF8,CDLF16, CDLF32, CDLF 42, CDLF65, CDLF85 ,CDLF120, CDLF150

Features: Hot andcold clean, non-flammable and non-explosive liquid without solid grain and fibre. If for explosive liquid should choose explosion-proof motor. Mineral water, soft water, pure water, edible oil and other light chemical mediums When the density or viscosity of liquid is larger than that of water, it is necessary to select a driving motor of high-power Application:

Urban water supply and pressure boosting Industrial circulating system and processing system Water supply for boiler, condensing system, high-rise building or fire fighting system. Water treatment and infiltration system Agricultural irrigation Cooling water system Many other domestic and industrial special applications CDLF vertical multistage pump, jockey pump

DIN24255 end suction pump, close-coupled pump

XA end suction water pump is a single stage, single suction back pull out design pump, all dimensions are designed according to DIN24255 standard, and the flange can be drilled according to GB4216-84(PN16) or ISO, BS and ANSI standard. The pump is for general applications.

DIN24255 end suction pump,close coupled pump

Product name : XA End suction pump( Close-coulped and long-coupled type) Item: DIN24255/EN733 standard

Features :

---Comply with DIN24255 standard ---Back-pull-out design ---Wide hydraulic coverage  ---Low NPSH requirement ---High interchangeability- Entire range uses just 4 bearing assemblies ---Now type XA has been extended to incorporate 4 new bigger sizes ie. 200/32, 200/40, 250/32 and 250/40,enlarging the performance coverage up to 1080 m3/h flow rate ---Flexible shaft seal with mechanical seal as standard and gland packing as an option ---Various materials available (cast iron, bronze and SS316 etc.)

Data sheet :

Flow:2-1100m3/h  Head: 2-150m  Speed: 1450rpm/2900rpm (50Hz)    1750rpm/3500rpm (60Hz)  Temperature: -10--150 Celsius Degree Operating Pressure: 10Bar, Optional 16Bar

Application:

---City Water Supply , Irrigation , Fire Fighting , Air conditioning , water treatment plants

Submersible pump -China pump manufacturer

QW submersible sewage pump power:0.37-250KW

WQ type submersible sewage pumps are used as single or double flow channel impeller and wide pump body, allow solids passing through easily and fiber uneasily wound, made it most suitable to discharge sewage and dirt. And it’s distinctive design of double channel and large passage impeller effects high efficiency.

Product name : WQ submersible non-clog sewage pump , dredge pumpFeatures :

---Flood-proof motor with IP68 Protection class
---Large free passage impeller employed
---Built-in thermal motor protector
---Heavy-duty double mechanical seals
---Special design of cable connector is reliable to avoid any liquid ingress

Data sheet :

Flow: 18-3750m3/h
Head: 5-60m
Material: cast iron, SS304, SS316
Temperature: 80℃

Application:

---Pumping of civil and industrial wastewater and sewage
---Sewage treatment plants
---Surface water drainage

API610 chemical process pump -Shanghai Guomei Pump Co.,ltd

ZA type chemical process pump is completely designed as per API610 standard,d with rear pull-out design. Between the pump volute and impeller casing provided with 
replaceable seal ring.Pump case is divided into the middle support and the bottom support,and wholecast 

for foot pump.

ZA Chemical process pump 

Product name : API 610 chemical process pump

Features :

---Handling clean or slightly contaminated, hot, acidic and caustic liquids ---Designed to API610 standard ---High pressure and temperature

Data sheet :

Flow:up to 2500m3/h Head: up to 250m Pressure: up to 2.5MPa Temperature: -80-450C

Application:

---Refineries, petrochemical industry. ---Chemical industry, cryogenic engineering ---Water supply factory, sea water desalination ---Pharmaceutical and food technology ---Heat supply and air conditioning system